Mahomes & Kelce UV DTF Transfers

Materials: Ultraviolet designs printed on film

Our prints are vibrant and can be applied to glass, plastic, wood, metal and most hard surfaces. Once applied, they provide an embossed effect that is permanent and waterproof. UV DTF Prints are not dishwasher safe.

This listing is for one (1) UV DTF cup wrap transfer for a 16oz cup that measures approximately 9.5" x 4.5" (actual print area varies by design)

Application Instructions:

1. Make sure surface is clean using soap and water.

2. We recommend watching a YouTube video or two to learn how to apply, we found success using the "hinge method".

3. Using a soft cloth or squeegee, press the film pushing out any air bubbles.

4. Peel clear top film slowly and at an angle making sure design is sticking to the surface.

5. If you notice the design not sticking to the surface, place film back down and rub till the design sticks to the surface.

6. Excess glue can be cleaned off with soap and water once design cures for 24 hours.

CAUTION! Ensure your wrap is lined up before removing the backing. Adhesive is VERY strong, once the glue touches the surface, do NOT attempt to remove.

*Please note that not all brands of 16 oz. glass cups have the exact same measurements.